I-button Evo
Electronic key with the off-site central unit.
- Main Features
- Technical features
- I-Button software
- Keys Technical Features
- Technical warnings
- More security thanks to the off-site central unit:
- management up to 32 floors thanks to the expansion boards;
- easy mounting: central unit and expansion boards are supplied on din-bar case;
- vandal resistant: reader vandal proof and NOT magnetic key;
- BACKUP/Storage management for all keys;
- available versions: monostable, bistable or automatic push buttons;
- easy setting of the keys before installation:
- manual setting on the board;
- by PC thanks to the dedicated software.
- degree of protection: IP51.
- Programmable keys can be more than 500.
- Body: stainless steel.
- Mounting: he button is put into the cutout (Ø 32,2) from the front and fixed by threaded ring. Available for a faceplate thickness from – 0,7 mm to 3 mm.
- Power supply: 12 o 24V dc +-10%.
- Wiring: terminal connectors for service inputs/ outputs, pre-wiring between I-Button-central unit-expansions.
- Up to 8 expansions board for 1 central unit (up to 32 floors).
- Management of the stored keys on the I-Button.
- Temporary activation or disactivation of key.
- Selection of the associated floors for each key.
- A description can be associated at each key (e.g. Name and surname of the owner).
- Search for key or description.
- Report in Pdf print about general I-Button information.
- Vandal and water-resistant.
- Light and suitable to be located in a general keychain.
- Keys can not be reproduced.
WARNING GROUNDING SYSTEM
In case of installation of the device on a metal fixture, it is strongly recommended to connect the fixture to the grounding system, to avoid malfunction or damage to the electronic device installation.
WARNINGS FOR CLEANINGS
Our push buttons must be cleaned only and exclusively with a COTTON RUG and WARM WATER. Avoid every use of chemical substances, above all for plastic surfaces.
Most of Vega products are made in polycarbonate, ABS, methacrylate or Nylon 66. The use of many cleaning products with caustic soda, hydrocarbons, hydrochloric acid, nitric acid, acetic acid, ethyl alcohol and methyl alcohol are strictly prohibited.